- Internet Specials
- New Products
- Knife Steel
- Bed Lube
- Coolant
- Grinding Wheels
- Carbide Knives
- Jointing Stones
- Diamond/CBN Wheels
- Feed Rollers
- Cutterheads
- Insert Tooling
- Accessories
- Spindle Rebuild
- Ground to Pattern Knives
- Feed Roller Sharpening
- Moulder/Grinder Training
- About Us
- Contact Info
- Terms
* Shipping and handling will
be
charged separately
from
online purchases.
|
|
Superabrasive Wheels: |
Diamond/Borazon
Weinig, R912, & R909
Straight Knife Grinders
|
MSI - Diamond / CBN Dressers |
|
Diamond/Borazon |
 |
Super Abrasive
Wheels
MSI
Super abrasive wheels
are made on precision ground metal plates toprovide the most
accurate grind possible. Custom wheels are available. MSI wheels are
1/4" depth of cut for a longer lasting wheel. |
|
When
profile grinding, a 3mm wheel or smaller is most often recommended.
This reduces the heat build up from the grinding process.
Use the correct surface feet per minute (SFPM) and the correct
coolant for the best results. |
CDX 8" x 60mm bore
(
For Piggy Back and Carbide Inlay) |
Grit |
MSI |
Weinig |
| 4MM with 2MMRadius |
120 |
TC-22001
|
WEI-930-062020
|
| 3MM with 1.5MM Radius |
120 |
TC-22002
|
NA |
| 2MM with 1MM Radius |
120 |
TC-22003
|
WEI-930-062021
|
MSI Diamond and CBN Wheels are available with a 5 MM Hub so that
you
can
use less
plastic shims to center the grinding wheel to the machine. |
CBN
8" x 60mm bore
(For High Speed Steel) |
MSI
(Finishing High Speed Steel) |
Grit |
Weinig
(Finishing
High Speed Steel) |
Grit |
4MM 2MM
square |
TC-23001
|
220 |
WEI-930-062008
|
180 |
| 4MM with 2MM radius |
TC-23002
|
220
|
WEI-930-062007
|
180 |
| 3MM with 1.5MM radius |
TC-23003
|
220 |
N/A |
|
| 2MM with 1MM radius |
TC-23004
|
220 |
WEI-930-062010
|
180 |
| Diamond 8"x 60mm bore
(For carbide only) |
MSI
Roughing |
Weinig
Roughing |
MSI
Finishing |
Weinig
Finishing |
|
4MM x 2MM
square |
TC-24001-S
|
N/A |
TC-25001-S
|
WEI-930-062003
|
|
4MM with 2MM radius |
TC-24001
|
WEI-930-062002
|
TC-25002
|
WEI-930-062006
|
|
3MM with 1.5MM
radius |
TC-24002
|
WEI-930-062015
|
TC-25003
|
WEI-930-062016
|
|
2MM with 1MM
radius |
TC-24003
|
WEI-930-062018
|
TC-25004
|
WEI-930-062011
|
| Shims |
| Description |
Part # |
| 0.001" Thick (Orange) |
WEI-100709
|
| 0.002" Thick (Red) |
WEI-100708
|
| 0.005" Thick (Blue) |
WEI-100707
|
back to top |
|
Weinig R912 & R909 Straight Knife Grinders |
|
Description |
Price |
Description |
Price |
| For
back grinding of tungsten carbide knives |
WEI-912-062005
|
For
back grinding of High Speed Steel thin planing knives |
WEI-912-062001
|
| For
face grinding oftungsten carbide solid cutters |
WEI-912-062006
|
For
face grinding of High Speed Steel solid cutters |
WEI-912-062002
|
| For
back grinding of
TCT inlaid knives |
WEI-912-062009
|
For
back grinding of corrugated back High Speed Steel
knives |
WEI-912-062003
|
| |
|
For
face grinding of High Speed Steel finger-joint cutters |
WEI-912-062008
|
back to top |
Don't see what your looking for? Give us a call. |
Phone: 704.528.3539
Fax: 704.528.3538
Hours: Mon-Fri. 8:00AM to 5:00PM - EST |
Technical Assistance Call:
1.866.MOULDER (866.668.5337)
|
| |
|
Shipping Address:
Moulder Services Inc.
602 South Eastway Dr.
Troutman, NC 28166
|
US Mail:
Moulder Services Inc.
PO Box 479
Troutman, NC 28166
|
|
