Home > Accessories > Abrasives >

MSI Abrasives - Cleaning Stick

Our Price: $3.25

Product Code: TA-101

Product Description
A-220-H 3/4 x 3/4 x 4 Cleaning Stick. For use with Diamond/CNB wheels
Recommended speed of 1200-1800 rpm, use coolant and create a slurry for best cleaning of the wheel
To reshape the wheel use TC-L30001 Molyrod or WEI-VEN-700-070
How to Use This Product
Depending on your machine there are two basic techniques for using the TA-101 super abrasive cleaning stick. If your machine stops within a few seconds, then slow your machine to around 1500 rpm and place the cleaning stick into the diameter of the wheel. Hold it for about 10 secs with the coolant one until a slurry occurs. Then gently move the stick in a radius motion to clean the entire surface of the wheel. Once this is done you can grind again.
If your machine has a slow down time of 8-10 secs or more then turn the machine grinding wheel off, leaving the coolant on, and create the slurry as explained above.

Suggested Products...
MSI Carbide - 2 Knife System - Piggy Back ( 80mm) MSI Coolant - 1 Gallon
Our Price: $118.84

Our Price: $30.00

TC-US-805 MSI Coolant

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Accessories > Abrasives
Accessories > Tool Room