You are here:Home > Moulder Parts > Belts
Customize your own set! Call us at 704-660-6977, or e-mail [email protected] for more information.

Replacement Belts

In order to improve the life of your belts, be sure to tension them once a week for the first month of the new belts use. After that, check the tension once a month. There is a belt tensioning gauge available. Otherwise, tension the belts to about1/32" pull together. Make sure that the belts are properly tracking. A mistracking belt will wear out quickly. When ordering please specify the type of belt needed: flat, v-belt or timing belt. Call
or e-mail for price and availability.

Replacement Bearings

When installing bearings be sure to use the proper amount of grease. Too much grease will reduce the life of the bearing. A normal bearing will require only to be filled half way, or what is called half packed. Use a high quality grease for this. The inner race of most bearings can be warmed long enough so that the inner race will slide overthe shaft. Before assembly check the condition of the shaft and housing to make sure the bearings facing the correct direction. Improper installation of the thrust style bearing can cause unsatisfactory performance. Call or e-mail for price and availability.

Metric Motors and Pulleys

Our metric motors are manufactured to the highest standards possible. These motors have extensive testing in the field for many years. The precision balance of the motor parts assure you of the best power transfer while eliminating vibration.

When calling or e-mailing for price, please have the following available: KW, HP, Frame, RPM, Shaft Size