|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part#:C24R; 24 Grit Rough Dressing Stick for vitrified and ceramic grinding wheels Do not use on super abrasive wheels. Instead use the TA-101 dressing stick for all Superabrasives.
|
Part#: TC-76101; Size: 60mm x 30mm x 25mm
|
Rubber-based block and stick set designed for removal of steel burrs remaining on the knife after finish grinding. Also excellent for removal of rust, burn marks and stains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part#: TC-830-021; Size: 1" x 1" x 6"
|
Part#: WEI-100730 When the working surface of the diamond or CBN wheel becomes "loaded" with material from the workpiece, it must be cleaned with this special aluminum oxide cleaning stick to remove embedded particles.
|
|
|
