You are here:Home > USED WEINIG PARTS > CLAMPING RINGS AND ADJUSTMENT PARTS (WEINIG)
Sort By:
Page of 1
Weinig Crank Handle Extension WEI-251-10203 Weinig Brass Feed Beam Raise/Lower Insert WEI-220-213003 Weinig Spindle Nut WEI-014-021016
WEINIG Crank handle extension WEINIG BRASS FEED BEAM RAISE/LOWER INSERT TR 22 X 4 THREAD

WEINIG Brass feed beam raise/lower insert TR22 x 4 thread
This is a NEW part
WEINIG Spindle nut commonly used on side heads for radial movement  Cast.
Lever for Table and Fences WEI-163-2J003 Axial Clamping Ring WEI-023-037001 FEED BEAM PENDULUMS
FEED BEAM PENDULUMS
Our Price: $335.00
Lever for table and fences  Straight section of rod about 14-1/2" long  overall length 18" Axial clamping ring
Casting #8932 For use on verticle spindles Unimat/Hydromat machines.
Weinig feed pendulums. Cast number 5540. Available in complete assemblies also.

Check by a qualified Technician to assure proper condition. These are reconditioned units.
FEED BEAM PENDULUMS Axial Clamping Ring WEI-023-067001 Weinig Axial Clamping Ring WEI-022-290020
FEED BEAM PENDULUMS
Our Price: $335.00
Weinig feed pendulums. Cast number 5539. Available in complete assemblies also.

Check by a qualified Technician to assure proper condition. These are reconditioned units.
Axial clamping ring
Casting #8932 For use on horizontal spindles Unimat/Hydromat machines.
Axial clamping ring
Casting #6660  Includes 12X70 bolt, corresponding washer and hex nut.
FEED BEAM PENDULUMS Weinig Axial Clamping Ring WEI-250-045004 Weinig Axial Clamping Ring WEI-022-384041
FEED BEAM PENDULUMS
Our Price: $415.00
Weinig feed pendulums.  Cast number 8613. .  Spline mount to the universal. Reconditioned Axial clamping ring  WEINIG
Casting #5766 (2 1/4" from center of threaded hole to large opening). Includes 12X75 bolt, corresponding washer and hex nut.
Axial clamping ring for Weinig
Casting #5766 with counter sunk hole (1 7/8" from center of threaded hole to large opening. Includes 12X70 bolt, corresponding washer and hex nut.
TOP DOVETAIL SLIDE STRAIGHT JOINTER PARTS  WEINIG CHIP BREAKER
TOP DOVETAIL SLIDE
Our Price: $2,100.00
STRAIGHT JOINTER PARTS WEINIG
Our Price: $3,500.00
CHIP BREAKER
Our Price: $5,450.00
Top slide for Weinig H22B,H22A,U22A, H17B.
Please call for complete info 704-528-3513.
Straight jointer for Weinig H22B, U22A, H17B and other models.  Includes mount for bottom spindle mounting.  Call for availabilty Top chipbreaker for Weinig H22B, U22A, H17B. Complete with pneumatic system