Star Spring Grinder Adjustment

Rotex Coupling-Bore 24mm; 78mm Long
Uses insert 00361181 WEINIG



CALL  FOR AVAILABLITY OF USED PARTS

WEINIG Crank handle extension

ROTEX COUPLING WITH INSERT  28MM BORE X 90MM LENGTH

Rotex Coupling-Bore 25mm; Length 90mm
Uses Insert 00361180

WEINIG BRASS FEED BEAM RAISE/LOWER INSERT TR 22 X 4 THREAD

WEINIG Brass feed beam raise/lower insert TR22 x 4 thread
This is a NEW part

Used Top Spindle Hood Cover in good condition.  Cleaned, checked and painted.

Rotex Coupling Half-Hub 70mm

Rotex Coupling Half-Hub Length 80mm

WEINIG Spindle nut commonly used on side heads for radial movement  Cast.

LEFT HAND THREAD ADJUSTING SPINDLE FOR WEINIG P23E

Universal Assembly. Flanged on both ends with for bolt holes. 410mm length.

Lever for table and fences  Straight section of rod about 14-1/2" long  overall length 18"

REMOTE CONTROL FOR WEINIG RIGHT SPINDLE STRAIGHT JOINTER

Reconditioned universal assemblies, spline mount

Axial clamping ring
Casting #8932 For use on horizontal spindles Unimat/Hydromat machines.

Axial clamping ring
Casting #8932 For use on verticle spindles Unimat/Hydromat machines.

Weinig feed pendulums.  Cast number 8613. .  Spline mount to the universal. Reconditioned

Axial clamping ring  WEINIG
Casting #5766 (2 1/4" from center of threaded hole to large opening). Includes 12X75 bolt, corresponding washer and hex nut.

We offer a large assortment of metric motors by manufacturers such as  Siemens, Bauknecht, Brooks/Hansen, Weinig and others.  We have motors with RPM from 510 to 3600 and available in several voltages..  We have a few brake motors available.  Call for details.  704-528-3513  Prices vary depending on horsepower and status of brake versus non-brake motor.  We also offer invertors to provide braking for your existing motors

Axial clamping ring
Casting #6660  Includes 12X70 bolt, corresponding washer and hex nut.

Weinig Universal Joint Shaft
270mm length
Splined on both ends.
Replacement for 00360711 and 00360730
Commonly used on many machines for feed wheels above wood.

CALL FOR AVAILABLITY OF USED ASSEMBLILES

Axial clamping ring for Weinig
Casting #5766 with counter sunk hole (1 7/8" from center of threaded hole to large opening. Includes 12X70 bolt, corresponding washer and hex nut.

We offer a wide range of used Weinig variable speed control units.  Please call for full info on pricing and availability.

Side Pressure Unit for Weinig moulders

GRINDING ARBOR FOR WEINIG R925, R929, R930, R931  230MM LENGTH  1-1/2" DIAMETER

GRINDING ARBOR FOR WEINIG R932,R934, R935, R936, AND OTHERS  230MM LENGTH  1-13/16" DIAMETER

Good used hydraulic pump for Weinig hydraulic feed system

Top slide for Weinig H22B,H22A,U22A, H17B.
Please call for complete info 704-528-3513.

Top gear box for radial adjustment, H23, U23. Adjustment of dovetail that houses the spindle. Note: The length of the shaft determines top or bottom.