You are here: Home > Accessories > Diamond/CBN Wheels > Diamond/Borazon
MSI Super abrasive wheels are made on precision ground metal plates to provide the most accurate grind possible. Custom wheels are available.  MSI wheels are 1/4" depth of cut for a longer lasting wheel.

When profile grinding, a 3mm wheel or smaller is most often recommended.  This reduces the heat build up from the grinding process.  Use the correct surface feet per minute (SFPM) and the correct coolant for the best results.

MSI Diamond and CBN Wheels are available with a 5 MM Hub so that you can use less plastic shims to center the grinding wheel to the machine.
Sort By:
Page of 1
TC-22001 TC-22002 TC-22003

Part#: TC-22001; 4mm w/2mm radius. 120 Grit; Carbide Inlay

Part#: TC-22002; 3mm w/1.5mm radius. 120 Grit; Carbide Inlay Part#: TC-22003; 2mm w/1mm radius. 120 Grit; Carbide Inlay
TC-23001 TC-23002 TC-23003
Part#: TC-23001; 4mm x 2mm square. 220 Grit; Finishing High Speed Steel Part#: TC-23002; 4mm w/ 2mm radius. 220 Grit; Finishing High Speed Steel Part#: TC-23003; 3mm w/ 1.5mm radius. 220 Grit; Finishing High Speed Steel
TC-23004 TC-23005 TC-24001
Part#: TC-23004; 2mm x 1mm radius. 220 Grit; Finishing High Speed Steel Part#: TC-23005; 2mm x 1mm radius. 120 Grit; Finishing High Speed Steel Part#: TC-24001; 4mm w/2mm radius; Roughing
TC-24001-S TC-24002 TC-24003
Part#: TC-24001-S; 4mm x 2mm square; Roughing Part#: TC-24002; 4mm w/ 2mm radius; Roughing Part#: TC-24003; 3mm w/ 1.5mm radius Roughing
TC-25001-S TC-25002 TC-25003
Part#: TC-25001-S; 3mm w/ 1.5mm Radius Part#: TC-25002; 4 mm 60 mm with 2 mm Radius Part#: TC-25003; 1.5mm radius 60 mm Bore; Carbide only
TC-25004 WEI-100707 WEI-100708
Part#: TC-25004; 1.5mm radius 60 mm Bore; Carbide only Part#: WEI-100707; Size: .005 thickness Part#: WEI-100708; Size: .002 thickness
WEI-100709
Part#: WEI-100709; Size: .001 thickness